Table of Contents
Advertisement
Use FUNCTION KEY menu to assign F1~F5 with the following commands:
SCAN, NATIVE, ASPECT, BLUE ONLY, MONO, MARKER, H/V DELAY,
AUDIO METER, FAST MODE, TC, IMD, MUTE, PBP, CC, FREEZE, WIN
SELECT, FOCUS ASSIST, LUMA ZOOM CHECK, UNDEF. Refer to "5.1.9
FUNCTION KEY Menu" for the details.
F2
3.
It is used to activate to F2 function button. The operation is as the same as
F1's.
Press and hold the INPUT+F2 button for 3s can reset the menu settings to
factory originals, as shown in Figure 4.1-5.
F3
4.
It is used to activate to F3 function button. The operation is as the same as
F1's.
F4
5.
It is used to activate to F4 function button. The operation is as the same as
F1's.
F5
6.
It is used to activate to F5 function button. The operation is as the same as
F1's.
MENU
7.
Used to display or set the on-screen menu.
Pressing MENU step back to the higher level menu
Pressing MENU will cancel the Main menu
Use the MENU, ∧(UP), ∨(DOWN) and ENTER buttons to set the menu
items, refer to "5.2 Menu Settings" for detail about the main menu
FACTORY RESET
Factory Reset Now?
No
Figure 4.1-5 Reset Menu List
19
Yes
XCM-250 Features
Advertisement
Table of Contents
