Table of Contents
Advertisement
Chapter 2 Unpack and Installation
Unpack:
When unpacking the LCM156-E monitor, please verify that none of the components
listed in Table 3.1 are damaged or missing. If there are any components missing,
please contact your distributors or OSEE for it.
Installation:
Prepare for installation
1.
Please follow the procedures below before installing LCM156-E:
Check the package and equipment for any visible damage that may have
occurred during transit.
Confirm all the items listed on the packing list have been received.
Remove all the packing material including electrostatic-resistant packing.
Retain these packing materials for future use.
Install the LCM156-E in your desired method. Adequate ventilation is
2.
required when installed to prevent possible damage to the LCM156-E.
(Note operational specifications are 40
There are screw holes at the rear panel of LCM-E series monitors, which are
labeled in the following figures. Insert the pedestal into the case, and fasten it with
the screws provided. The pedestal of LCM156-E(Optional), LCM170-E and
LCM230-E are not quite the same. The pedestal installation for LCM215-E and
LCM240-E are quite the same as LCM170-E's. Assemble the pedestal as follows.
Table 3-1 Packing List
No.
Item
1
Device
2
Pedestal with screws
3
Power cord
4
Adapter
5
User manual
Quantity
1
1
1
1
1
0
0
C (100
F)).
5
Unpack and Installation
Advertisement
Table of Contents
