Mita DP-2800 Service Manual page 98

5A2
INSTALLING THE TRANSFER ROLLER UNIT
To install the (new) transfer roller unit, align the mounting holes 1 of the transfer roller unit
with the joints 2 of the paper feed unit.
1
2
CLEANING THE TRANSFER ROLLER UNIT
To clean the transfer roller, remove the transfer roller unit out from the feed unit as shown
on page 5-7. Use a vacuum cleaner, moving nozzle along the roller, but do not let the nozzle
directly touch on the roller, while rotating the transfer roller by the gear. Thoroughly clean
the entire surface of the roller.
5-8