Option Harddisk Errors - Mita DP-2800 Service Manual

5A2

Option harddisk errors

The printer indicates Harddisk error messages on the message display when it detects
errors with the option harddisk (if installed). This message is followed by a two-digit code
which provides the following meaning and corrective action to the specific error.
To clear the error message and continue operating the printer, press the CONTINUE key.
Harddisk
error code
01 Format error or the harddisk is
damaged.
02 No harddisk installed.
03 Harddisk is write-protected.
04 Insufficient capacaity on harddisk,
or the number of files stored has
exceeded 10,000.
05
The specified file does not exist.
06 The memory available for use by
the file system is insufficient.
* For instruction on how to format the harddisk, refer to the instruction handbook for the
printer or the harddisk.
6-32
Meaning Corrective action
Turn printer power off then on again. If
not recovered, consider reformatting the
harddisk.*
[Warning—Formatting erases all data
existing in the harddisk.]
Ensure that the harddisk is installed
properly in the printer. For instructions,
refer to the handbook accompanying
the harddisk unit.
Unlock the write-protection state by
KPDL or PJL. Consult the system admin-
istrator if required.
Free harddisk space by removing
unnecessary file in the harddisk.
Ensure whether a file with the specified
name exists on the harddisk. If the file
exists, ensure that correctly matching
file name is called, i.e. case. Print out a
partition list from the printer to obtain a
list of the included partition names in the
harddisk. (See the printer's handbook.)
Install more memory in the printer. (See
the printer's handbook.)