Memory Card Errors - Mita DP-2800 Service Manual

Message
I/F occupied
Processing
PAR FIT A4
Processing
PAR 600 A4
Processing
PAR 300 A4

Memory card errors

Error Applicable
code card type
01 SRAM
02 SRAM
03 SRAM/flush
04 SRAM
05 SRAM
The interface selected is currently being used. This message
only appears if an optional interface is installed.
The interface is secured while the interface name displayed
in the message display is flashing even if the printer is in the
ready state. How long this takes depends on the interface
release timeout (FRPO J2) setting.
This message appears, and then the ATTENTION indicator
lights, when an attempt is made to select a secured interface
from the control panel or when an attempt is made to perform
memory card operations while the interface indicator is flashing.
Repeat operations after releasing the interface.
Compressed data is printed due to insufficient memory.
Compressed data is printed due to insufficient memory when
FIT flashes in the resolution indicator. The quality of printed
data is reduced when this occurs. FIT will continue flashing
even after printing is finished. The resolution indicator will
automatically return to reading 600 dpi when any key is
pressed, when a timeout occurs, or when subsequent data is
received. Expand printer memory to avoid this error.
600 dpi processing cannot be performed due to insufficient
memory. When 300 flashes in the resolution indicator even
though the printer was set to 600 dpi, the printer automatically
set resolution to 300 dpi due to insufficient memory and
continued printing. The resolution indicator will automatically
return to reading 600 dpi when any key is pressed, when a
timeout occurs, or when subsequent data is received.
Expand printer memory to avoid this error.
Card size error (An attempt was made to write data of greater
than 32 MB in size.). Reduce the size of the data to be written from
the host computer to 16 MB or less; or, a file name could not be
found in the memory card.
No memory card inserted. Insert a proper memory card.
Non PCMCIA card. Replace the card with a PCMCIA card.
Not RAM card. Use a SRAM-type card if you want to write data
to an memory card.
Memory card battery error. Replace the memory card's internal
battery with a new one.
Corrective action
Meaning
5A2
6-11