Drive Gears Assembly - Mita DP-2800 Service Manual

5A2

Drive gears assembly

Begin removing the driver gear assembly by first removing the sub gears assembly C. This
assembly mounts gears for driving the toner container and the waste toner conveyer. To
remove this assembly, remove two screws 1.
Then, remove the waste toner conveyer housing. To remove this part, remove three screws
2. The right side cover must be removed first. Remove five screws. Detach two connectors.
Then remove the drive assembly from the printer.
5-20
1
2
2
Sub gears
assembly C
Waste toner
conveyer housing