Getting Access To The Memory Sockets - Mita DP-2800 Service Manual

5A2

Getting access to the memory sockets

The main circuit board of the printer is equipped with two sockets for memory expansion.
Expansion memory is available in the form of a SIMM. To gain access to the main board,
the printer's rear panel should be removed.
Warning: Turn the printer's power off. Unplug the printer's power cable and disconnect the
printer from the computer or the network.
Turn the power switch off. Remove the main board access panel 1 by removing 6 (plated)
screws. The main controller board 2 is exposed for inserting SIMMs.
2
1
Caution: When the main board is open, use care to avoid foreign objets from entering the
main board area. Otherwise, a serious damage to the printer could result.
2-10