Mita DP-2800 Service Manual page 127

Message
Paper jam
##############
Warning
Low memory
Replace Toner
Clean printer
Replace Toner
Clean printer
Clean printer
Press CONTINUE
Missing
Toner kit
Install MK
Call service
person##:#######
Memory overflow
Press CONTINUE
This message appears when the front cover is open during a
paper jam.
Letters A through I and numbers 1 through 6 will appear in
place of the #'s. For details on the meaning of the text
displayed, see page Chapter 6-34. A label displaying these
number indications is also attached to the back of the front
panel. The indicator on the front panel also flashes the
location of the paper jam.
The printer's internal memory is running low. Remove any
unnecessary download fonts and/or macros. You can check
the amount of user memory currently available by printing a
status page.
There is not enough toner inside the toner container. Be sure
to promptly replace with a new toner as the printer will stop
printing before long. Clean the printer after replacement.
There is no more toner in the toner container. The printer has
stopped because there is no more toner. Replace with a new
toner kit. After replacing, be sure to clean the printer.
Please clean the inside of the printer. After cleaning the inside
of the printer, press the CONTINUE key and the printer will be
ready for printing. This message will be displayed when
replacing the toner container after the message Replace
Toner Clean printer has been displayed.
No toner container is installed. Install the toner container. The
printer does not operate when this message is displayed.
The maintenance kit needs to be replaced. Replace the
maintenance kit since the total number of printed pages has
reached 350,000. Contact the licensed dealer from which you
purchased the printer or service outlet. The maintenance kit
includes a drum unit, developer unit and so on.
A failure requiring the attention of service personnel has
occurred. A failure requiring the attention of service personnel
has occurred and the printer has stopped. The corresponding
error code and total printed pages are displayed in the
message display (part indicated by #'s).
Current print processing cannot continue due to insufficient
memory. Check available user memory by printing a status
page, and either remove unnecessary download fonts and/or
macros or expand the printer's memory.
Press the CONTINUE key to print data as far as it was stored.
You can abandon printing by the CANCEL key.
Corrective action
5A2
6-9