Mita DP-2800 Service Manual page 46

5A2
Attach the grid cleaner 3 to the drum unit as shown in the diagram below. Insert the fixture
pin on the cleaner into the hole on the drum unit with the pad facing up.
Hold and pull up the main charger, then draw it out until it stops. Then, push it all the way
in. Repeat this procedure for 5 times or more.
To release the
main charger
unit for pulling,
first pull it up...
Then, pull it
horizontally
out.
After cleaning is done, pull the main charger unit in place using the reverse manner of the
above. Close the front cover.
3-6
3