Dirt On The Top Edge Or Back Of The Paper - Mita DP-2800 Service Manual

5A2

Dirt on the top edge or back of the paper

ABC
123
Check toner contamination in
various parts.
Check the transfer roller.
6-38
• Dirty edges and back of the paper can be caused by
toner accumulated on such parts as the paper chute,
paper transportation paths, the bottom of the developer
unit, and the fuser inlet. Clean these areas and parts to
remove toner.
• If the transfer roller is contaminated with toner, clean
the transfer roller using a vacuum cleaner; or by
continuously printing a low-density page until the
symptom has faded away.