Cleaning The Paper Feed Unit - Mita DP-2800 Service Manual

5A2

Cleaning the paper feed unit

The paper feed unit must be cleaned of paper dust whenever the toner container is
replaced. To gain access to the paper feed unit, first, open the front cover. Draw out the
paper feed unit by the handle (green) 5 on its front side.
Cleaning the paper feed unit should be done on several parts—the separation charger,
registration rollers, paper ramp, etc. as follows.
Caution: Do not touch the transfer roller (black sponge roller) 6 during the cleaning
procedure.
Take out the cleaning brush 7 recessed in the front of the paper feed unit. Cleaning the
separation charger (saw-toothed) 8 by sweeping with the brush.
8
7
6
5
The printer can get ready for printing approximately 15 seconds after replacing the toner
container.
3-7