Status Page - Mita DP-2800 Service Manual

Status page

The printer can print different types of the status page—the user status page and the service
status page. This section exclusively describes the service status page. For information on
the user status page, refer to the printer's instruction handbook .
Information obtainable on the service page include various settings for the printer, service
statistics, etc. To print a service status page, proceed as follows:
1 Ensure that the message display is indicating
Ready.
2 Press the MODE SELECT key.
3 Press until the message display indicates
Others>.
4 Press .
5 Press repeatedly until the message display
indicates >Service>.
6 Press . Press
indicates >>Print status page.
7 Press ENTER. The question mark (?)
appears at the end.
8 Press ENTER again. The service status
page is printed.
Service information on the status page
An example of the service status page is shown below. (Note the details born by a status
page may differ from a firmware version to another.) Most of the service information is
located under Service information .
until the message display
Others>
>Service>
>>Print status page>
>>Print status page?
5A2
B-1