General Error Handling; Panel Indicator - Mita DP-2800 Service Manual

General error handling

This section provides how to handle general errors as indicated on the message display.
Refer to the section starting on page for errors calling for service person assistance.

Panel indicator

The symbol mark on the front panel provides following user-handling errors. Proceed with
Corrective actions indicated below.
Indicator
Low toner
Paper feeding
Duplexer
ATTENTION
Indication
Flashing The printer has run low on toner. The toner
should be replaced as soon as possible.
Clean the printer after replacement.
Lit Toner is low or has run out. Replace with a
new toner container.
Fast flashing Paper is jammed in the location flashing.
Slow flashing The paper has run out in the paper cassette
or multi-purpose tray. Add paper to the
paper feed source.
Lit This indicates either the current paper feeder
or the paper output point.
Flashing A paper jam has occurred in the optional
duplexer. Remove the paper jam in the
duplexer.
Lit An optional duplexer has been attached,
and the printer is printing in duplex printing
mode.
Flashing The printer is warming up (Please wait) or
the printer has insufficient memory available.
Confirm the message indicated on the
message display.
Lit A message will be displayed in the message
display. Take corrective action according to
the message displayed. The table on the
following pages lists the corrective action to
take in response to each message.
Corrective action
5A2
6-7