5A2
Installing SIMM
Insert the SIMM 1 into the socket 2 as shown. Carefully push the board upright until it
snaps into place. Make sure that the catches at the ends of the socket fit into the holes 3
at the ends of the SIMM board.
3
1
2
Testing the expansion memory
After installing SIMMs in the printer, test the printer to see if the installation has been
successful. To test the expansion memory, turn printer power on and print a status page.
If the installation has been successful, the Total memory (Memory Allocation) of the status
page will show the expanded memory size corresponding to the amount of memory added.
2-12