Gigabit Ethernet Line Card (Glc2) - Cisco ASR 5000 Series Installation Manual

▀ Gigabit Ethernet Line Card (GLC2)

Gigabit Ethernet Line Card (GLC2)
The following figure shows the single-port GLC2. The front panel of this card is labeled "Ethernet 1000". This card
supports a single fiber or copper Small Form-factor Plugin (SFP) transceiver module as described below:
Figure 43.
Important:
▄ ASR 5000 Installation Guide
128
GLC2 Fiber Optic Interface
The following SFP modules are hot-pluggable.
Cabling the Gigabit Ethernet Line Cards