Removing A Lower Fan Tray Assembly - Cisco ASR 5000 Series Installation Manual

Replacing Upper or Lower Fan Tray

Removing a Lower Fan Tray Assembly

Follow the instructions below to remove a lower fan tray assembly from the chassis.
Step 1
Unsnap the plastic bezel from the lower-front of the chassis by placing your fingers in the notches on its sides and
pulling it toward you.
Step 2 Use a Phillips #1 screwdriver to loosen the four captive screws that hold the fan tray cover/EMI shield in place. Pull the
cover away from the chassis. Do NOT use an electric or pneumatic torque driver to loosen these screws.
Step 3
Pull the fan tray toward you with the handle cut-out on the front of the fan tray assembly. The fan tray assembly should
easily slide out of the chassis.
Removing a Lower Fan Tray Assembly ▀
ASR 5000 Installation Guide ▄
235