Cisco ASR 5000 Series Installation Manual page 72

▀ Installing the Chassis
Step a
on the sides of the bezel and pulling it toward you. Place it to the side for re-installation later.
Step b
Step c
out of the chassis. Place it to the side for re-installation later.
W
ARNING
from its front and back as you slide it completely out of the chassis. Vorsicht beim Herausziehen der Luefter-
Schublade: um eine Beschaedigung des Moduls und eventuelle Verletzungen zu vermeiden, sollte diese hinten und
vorne unterstuetzt werden.
Step 2 Remove the lower fan tray assembly.
▄ ASR 5000 Installation Guide
72
Remove the plastic bezel from the upper-front of the chassis by placing your fingers in the notches
Loosen the four screws that secure the fan tray in place using a Phillips #1 screwdriver.
Grasp the two bezel mounts on the front of the fan tray and pull. The fan tray should easily slide
:
To avoid personal injury and/or damage to the fan tray, be sure to support the weight of the fan tray
Chassis Installation