Cisco ASR 5000 Series Installation Manual page 245

Replacing Application Cards
Step 4
Slide the interlock switch on the front panel of the application card upward to lock the ejector tab in place. The flange
on the left-side of the interlock switch prevents movement of the ejector tab when raised completely.
Important:
rail.
Step 5
Use a Phillips #2 screwdriver to tighten the screws at the top and bottom of the application card's front panel to secure
the card.
You must slide the interlock switch upward before securing the card's top screw to the mounting
Installing the Application Card ▀
ASR 5000 Installation Guide ▄
245