Troubleshooting The Gigabit Ethernet Line Card - Cisco 10000 Series Troubleshooting Manual

Troubleshooting the Gigabit Ethernet Line Card

Troubleshooting the Gigabit Ethernet Line Card
Figure 4-3
operation.
Make sure that the gigabit Ethernet Interface Converter (GBIC) type on the Cisco 10000 series router
Tip
matches the GBIC type at the other end of the fiber optic cable.
Figure 4-3
CISCO
10000
Cisco 10000 Series Router Troubleshooting Guide
4-6
describes the LEDs on the gigabit Ethernet line card faceplate to help you verify correct
Gigabit Ethernet Line Card Faceplate and LED Descriptions
LED Status
Fail Yellow Yellow
Off
Rx (receive) Green
Off
Tx (transmit) Green
Off
Link Green
Off
Chapter 4
Description
A major failure has disabled the
line card.
The line card is operating
properly.
Receiving traffic.
Not receiving traffic.
Transmitting traffic.
Not transmitting traffic.
Carrier detected; the port is
able to pass traffic.
No carrier detected; the port is
not able to pass traffic.
Troubleshooting Line Cards
OL-0439-02