Cisco ASR 5000 series Installation And Administration Manual

Aggregation services router
Hide thumbs Also See for ASR 5000 series:
Table of Contents

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Cisco ASR 5000 series

  • Page 2 ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.
  • Page 3: Table Of Contents

    BITS Timing ..............................43 Central Office Alarm Interface ........................43 Redundancy Crossbar Card ..........................43 Ethernet 10/100 Line Card ..........................45 Ethernet 1000 (Gigabit Ethernet) Line Cards ....................47 Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 4 BNC BITS Interface Version .......................... 118 3-Pin BITS Interface Version .......................... 120 Connecting to the Management LAN ........................123 Using the SFP Interfaces ..........................123 Using the RJ-45 Interfaces ..........................124 ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 5 Ethernet Line Card Active LED States ....................... 182 Ethernet Line Card Standby LED States ..................... 183 Ethernet Line Card Interface Link LED States ................... 184 Ethernet Line Card Activity LED States ..................... 184 Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 6 Removing Flash Memory PC Cards ........................235 Replacing the Chassis' Air Filter ..............239 Determining When an Air Filter Needs Replacing ....................240 Removing the Old Air Filter ..........................241 ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 7 10/100/1000 Mbps RJ-45 Interface ......................299 Central Office Alarm Interface ........................299 BITS Timing Interface ..........................302 Ethernet 10/100 Line Card Interfaces ......................303 10/100 Mbps RJ-45 Interface ........................303 Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 8 Chassis Air Flow ............................. 321 RoHS Compliance Statement ..............cccxxii Chassis ................................cccxxiii Fan Assembly ..............................cccxxiv Power Filter Unit (PFU) ..........................cccxxv Full Product ..............................cccxxvi ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 9: About This Guide

    About this Guide This document pertains to the features and functionality that run on and/or that are related to the Cisco® ASR 5000 Chassis, formerly the Starent Networks ST40. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄...
  • Page 10: Conventions Used

    Required keywords and variables are surrounded by grouped brackets. Required keywords and variables are those components that are required to be entered as part of the command syntax. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 11 (also known as a pipe filter). Pipe filters can be used in conjunction with required or optional keywords or variables. For example: Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 12: Contacting Customer Support

    Use the information in this section to contact customer support. For New Customers: Refer to the support area of http://www.cisco.com for up-to-date product documentation or to submit a service request. A valid username and password is required to this site. Please contact your local sales or service representative for additional information.
  • Page 13: Asr 5000 Hardware Platform Overview

    Chapter 1 ASR 5000 Hardware Platform Overview This chapter provides information on the hardware components that comprise the ASR 5000. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 14: Chassis Configurations

    Gigabit Ethernet Line Card 28** (GELC) Quad Gigabit Ethernet Line Card 28** (QGLC) 10 Gigabit Ethernet Line Card 14*** (XGLC) Optical Line Card (OLC) SGSN only 28** ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 15 17 to 32 and 33 to 48, regardless of the number of installed XGLCs. Figure 1. Chassis Components (front and rear views) This diagram shows exploded views of the front and rear chassis components. They are described below: Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 16 Power Filter Units (PFUs): Each of the system’s two PFUs provides -48 VDC power to the chassis and its associated cards. Each load-sharing PFU operates independently of the other to ensure maximum power feed redundancy. Refer to the Power Filter Units section for more information. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 17: Asr 5000 Chassis Descriptions

    16 lower) for line cards. Figure 2. Front Slot Numbering Scheme for Application Cards The rear of the chassis features a half-slot design that supports up to 32 line cards: Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 18: Rear Slot Numbering For Half-Height Line Cards

    For lower rear slot numbers, add 32. Again, a redundant line card for an application card in Slot 1 would be (Slot 1 + 32 = Slot 33). Slot 33 is the lower right-most slot on the rear of the chassis, also behind Slot 1. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 19: Rear Slot Numbering With Full-Height Line Cards

    The midplane also contains two separate -48 VDC busses (not shown) that distribute redundant power to each card within the chassis. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 20: 320 Gbps Switch Fabric

    System Management Card (SMC), this IP-based, or packetized, switch fabric provides a transport path for user data throughout the system. The 320 Gbps switch fabric establishes inter-card communication between the SMC(s) and other application cards within the chassis, and their respective line cards. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 21: 32 Gbps Control Bus

    280 Gbps Redundancy Bus The Redundancy Bus consists of multiple, full-duplex serial links providing packet processing card-to-line card redundancy through the chassis’ Redundancy Crossbar Cards (RCCs) as shown below. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 22 Therefore, the Redundancy Bus provides 140 Gbps symbol rate (112 Gbps user data) of throughput per RCC, 280 Gbps symbol rate (224 Gbps user data) total for both. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 23: Oc-48 Tdm Bus

    SPIO experiencing a failure to the redundant SPIO. While it is recommended that an SPIO is installed directly behind its corresponding SMC, this bus allows either SMC to utilize either SPIO. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 24: Power Filter Units

    PF. Figure 6. Power Filter Unit Table 4. Power Filter Unit Component Descriptions Item Description Plastic terminal cover VDC (-48 VDC input terminals) RTN (voltage return terminals) ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 25 Power Filter Units ▀ Item Description Power filter unit handle Circuit breaker (On/Off) rated at 165A Power LED (See Replacing the Chassis’ Power Filter Unit for details.) Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 26: Fan Tray Assemblies

    The air is then pushed upward across the various cards and midplane within the chassis to support vertical convection cooling. Figure 7. Lower Fan Tray Assembly ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 27: Air Filter Assembly

    Upper Fan Tray The upper fan tray unit contains multiple fans that exhaust air from the upper rear and sides of the chassis. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 28: Chassis Airflow

    Airflow within the chassis is designed per Telcordia recommendations to ensure the proper vertical convection cooling of the system. Detailed information is located in the Chassis Air Flow section in Environmental Specifications chapter of this guide. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 29: Asr 5000 Application Cards

    Internal gigabit Ethernet switch fabrics for management and control plane communication The front panel of the SMC and its major components is shown below: Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 30 Interlock Switch —When pulled downward, the interlock switch notifies the system to safely power down card prior to removal. Card Level Status LEDs—Show the status of the card. (See Applying Power and Verifying Installation for definitions). ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 31: Smc Raid Support

    Overwriting a valid or invalid disk partition, RAID image, and file system RAID construction in progress and possible failure Low disk space Files deleted to free up disk space Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 32: Packet Processing Cards: Psc, Psc2, And Ppc

    Manages both external line card ports and the internal connections to the data and control fabrics The following sections describe the differences between the PSC and PSC2 cards. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 33: Packet Services Card (Psc) Description

    The front panel of the PSC and its major components is shown below: Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 34 Interlock Switch—When pulled downward, the interlock switch notifies the system to safely power down card prior to removal. Card Level Status LEDs—Show the current status of the card. (See Applying Power and Verifying Installation for definitions.) ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 35: Packet Services Card 2 (Psc2) Description

    ICSR is not supported between a chassis using PSC2s and a chassis using PSCs or PPCs due to the different capabilities of the two chassis. Power Estimate 325W Maximum The front panel of the PSC2 and its major components is shown below: Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 36 Interlock Switch—When pulled downward, the interlock switch notifies the system to safely power down card prior to removal. Card Level Status LEDs—Show the current status of the card. (See Applying Power and Verifying Installation for definitions) ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 37: Packet Process Card 3 (Ppc3) Description

    The PPC has a 2.5 G/bps-based security processor that provides the highest performance for cryptographic acceleration of next-generation IP Security (IPsec), Secure Sockets Layer (SSL) and wireless LAN/WAN security applications with the latest security algorithms. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 38: Interoperability

    The PPC is fully redundant with a spare PPC. Power Estimate 325W Maximum The front panel of the PPC and its major components is shown below: Figure 13. Packet Processor Card ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 39 Interlock Switch—When pulled downward, the interlock switch notifies the system to safely power down card prior to removal. Card Level Status LEDs—Show the current status of the card. (See Applying Power and Verifying Installation for definitions) Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 40: Asr 5000 Line Cards

    8 fails, the redundant SMC in slot 9 becomes active and works with the SPIO in slot 24. If the SPIO in slot 24 should fail, the redundant SPIO in slot 25 takes over. The following shows the panel of the SPIO card, its interfaces, and other major components. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 41 Interlock Switch—When pulled downward, the interlock switch notifies the system to safely power down card prior to removal. Card Level Status LEDs—Show the status of the card. See the Applying Power and Verifying Installation for definitions. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 42: Management Lan Interfaces

    The console uses an RS-232 serial communications port to provide local management access to the command line interface (CLI). A 9-pin-to-RJ-45 console cable is supplied with each SPIO card. The console cable must provide carrier-detect when attached in a null modem configuration. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 43: Bits Timing

    The RCC located in slot 40 supports line cards in slots 17 through 23 and 26 through 32 (upper rear slots). The RCC in slot 41 supports line cards in slots 33 through 39 and 42 through 48 (lower rear slots): Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 44 Interlock Switch—When pulled downward, the interlock switch notifies the system to safely power down card prior to removal. Card Level Status LEDs—Show the status of the card. (See Applying Power and Verifying Installation for definitions). ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 45: Ethernet 10/100 Line Card

    (those operating in Standby mode). The following shows the panel of the Ethernet 10/100 line card, identifying its interfaces and major components: Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 46 Card Level Status LEDs—Show the status of the card. (See Applying Power and Verifying Installation for definitions). RJ-45 10/100 Ethernet Interfaces—Eight auto-sensing RJ-45 interfaces for R-P interface connectivity, carrying user data. Ports are numbered 1 through 8 from top to bottom. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 47: Ethernet 1000 (Gigabit Ethernet) Line Cards

    (those operating in Standby mode). The following shows the panel of the Ethernet 1000 line card with the fiber connector, identifying its interfaces and major components. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 48: Quad Gigabit Ethernet Line Card

    There are several different versions of Small Form-factor Pluggable (SFP) modules available: Table 14. SFP Modules Supported by the QGLC Module Card Interface Type Cable Specifications Type Identification ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 49 They are not required behind any redundant packet processing cards (those operating in Standby mode). The following shows the front panel of the QGLC, identifying its interfaces and major components: Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 50: 10 Gigabit Ethernet Line Card

    ASR 5000 and the packet core network, and reduces the number of physical ports needed on the ASR 5000. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 51: Line Card Installation

    Table 16. SFP Modules Supported by the XGLC Module Type Card Interface Type Cable Specifications Identification Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 52 Disposal of this product should be performed in accordance with all national laws and regulations. The following shows the front panel of the XGLC, identifying its interfaces and major components: ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 53 Interlock Switch—When pulled downward, the interlock switch notifies system to safely power down card prior to removal. Card Level Status LEDs—Show the status of the card. (See Applying Power and Verifying Installation for definitions) Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 54: Optical Line Cards (Olc And Olc2)

    Wavelength: 1310 nm Core Size: 9 micrometers Cladding Diameter: 125 micrometers Range: Intermediate/21 kilometers Attenuation: 0.25 dB/KM Min/Max Tx Power: -15 dBm/-8 Rx Sensitivity: -28 dBm ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 55 Optical (ATM) Line Card in slots 17 through 23, 26 through 39, and 42 through 48. The following figures show the panel of the OLC and OLC2 Optical (ATM) Line Cards, indicating their ports and major components. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 56 OLC Optical (ATM) Line Card S F P S F P S F P A T M /P O S O C - 3 x x x x ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 57: Chassis

    Card Level Status LEDs—Show the status of the card. See the Applying Power and Verifying Installation for definitions. Port connectors—Fiber LC duplex female connector. Port Level Status LEDs—Show the status of a port. See the Applying Power and Verifying Installation for definitions. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 58: Channelized Line Cards (Clc And Clc2)

    STM-1 (optical OC-3). The transmission rate for the card is 155.52 Mb/s with 336 SONET channels supplying T1 and 252 SDH channels supplying E1. The CLC2 is RoHs 6/6 compliant. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 59 Line Cards in slots 17 through 23, 26 through 39, and 42 through 48. The following figures show the panel of the CLC and CLC2 Channelized Line Cards, identifying their interfaces and major components. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 60 ▀ ASR 5000 Line Cards Figure 22. CLC Channelized Line Card S F P S T M - 1 O C - 3 x x x x ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 61 Card Level Status LEDs—Show the status of the card. See the Applying Power and Verifying Installation for definitions. Port connectors—Fiber LC duplex female connector. Port Level Status LEDs—Show the status of a port. See the Applying Power and Verifying Installation for definitions. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 62: Standards Compliance

    2048 kbit/s Hierarchy, March 2000. ITU-T - Recommendation G.824 The Control of Jitter and Wander within Digital Networks which are based on the 1544 kbit/s Hierarchy, March 2000. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 63 Frame Relay Forum - FRF 5.0 - Network Interworking. Frame Relay Forum - FRF 8.1 - Service Interworking. Frame Relay Forum - FRF 12.0 - Frame Relay Fragmentation. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 64: General Application And Line Card Information

    The following shows an exploded view of how the card interlock switch works in conjunction with the ejector lever. Figure 24. Card Interlock Switch in the Lever Locked Position ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 65: Installation Procedure Overview

    Chapter 2 Installation Procedure Overview This chapter briefly describes the steps and tools that are required for the physical installation of the chassis. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 66: Chassis Components

    Upper bezel: Covers the upper fan tray bay. Lower fan tray cover: Secures the lower fan tray assembly. The cover also provides an air baffle allowing air to enter into the chassis. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 67 Power Filter Units (PFUs): Each of the system’s two 165 amp PFUs provides -48 VDC power to the chassis and its associated cards. Each load-sharing PFU operates independently from the other to ensure maximum power feed redundancy. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 68: Installation At A Glance

    Once the installation has been validated, you will be directed to the Administration and Configuration Reference that provides instructions on how to configure the system for operation. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 69: Required Tools And Equipment

    A computer or terminal server with a 9-pin RS-232C serial port, or 25-to-9-pin male RS-232C adapter. Used to connect to the SPIO's Console Port for accessing the Command Line Interface (CLI) for system configuration. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 70: Protecting Against Electro-Static Discharge

    Before the ESD you use the jacks on the chassis and its mounting brackets to provide ESD protection, you must first connect the chassis to ground according to the instructions in the Chassis Installation chapter of this document. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 71 Installation Procedure Overview Protecting Against Electro-static Discharge ▀ Figure 26. Chassis ESD Plug Locations Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 72: Federal Communications Commission Warning

    Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Laser Notice The lasers in this equipment are Class 1 devices. Class 1 laser devices are not considered to be hazardous. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 73: Chassis Installation

    Stromversorgungsanschluesse (-48 VDC und RTN). Vorsicht is geboten bei Arbeiten am Chassis, solange noch ein Netzteil verkabelt ist. Um die PFU komplett stromlos zu schalten muessen beide Kabel entfernt werden. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 74: Equipment Rack Configuration

    The upper fan tray pulls heated air up through the chassis. The air is forced through the side and rear exhaust vents located near the top of the chassis before it is expelled from the system. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 75: Mounting Options

    Standard: In this configuration, the flanges of the mounting brackets are flush with the front of the chassis. This is the default configuration as shipped. Refer to the Standard Installation of the Chassis section of this chapter. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 76 To do this, install the mounting brackets toward the middle of the chassis on either side. Refer to the Mid-Mount Installation of the Chassis section of this chapter. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 77: Weight Considerations

    When lifting any heavy object, it is important to remember to bend at the knees and lift with your legs. Bending at the waist and lifting with your back could cause personal injury. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 78: Installing The Chassis

    ESD damage to the components. Failure to do so could result in damage to electrical components and could potentially void your warranty. Step 1 Remove the upper fan tray. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 79 Vorsicht beim Herausziehen der Luefter-Schublade: um eine Beschaedigung des Moduls und eventuelle Verletzungen zu vermeiden, sollte diese hinten und vorne unterstuetzt werden. Step 2 Remove the lower fan tray assembly. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 80 Locate the PFU bay labeled Power Filter Unit 1 on the lower-left rear of the chassis. Step b Use a #2 Phillips screwdriver to loosen the four screws that secure the PFU in to the chassis. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 81: Standard Installation Of The Chassis

    If you took steps to reduce the weight of the chassis prior to installation, refer to the instructions in the Re-Installing Chassis Sub-components section to re-install the components. Otherwise, proceed to Application Card Installation. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 82: Mid-Mount Installation Of The Chassis

    Mount the chassis to the rails of the equipment rack with the hardware that was supplied with the equipment rack. Begin with the two bottom holes and work your way up until all seven holes on each flange are secured. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 83: Grounding The Chassis

    There are two sets of grounding terminals located at the lower-rear of the chassis. The following figure and the table that follows show the location of these terminals and provide specifications for the appropriate lug and cable size. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 84 Cable length: Not more than 70 feet (21.336 meters) one way. Cable size: 6 AWG (minimum). Follow the instructions below to connect the chassis to earth ground. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 85: Re-Installing Chassis Sub-Components

    Failure to do so could result in damage to electrical components and could potentially void your warranty. Step 1 Re-install the PFUs into the chassis. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...
  • Page 86 Re-install the second PFU in the PFU bay labeled Power Filter Unit 2 by repeating step b and step c. Step 2 Re-install the lower fan tray assembly into the chassis. ▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide OL-24878-01...
  • Page 87 Verify that the particulate filter is securely in place. Its front should be flush with the front of the fan tray assembly and its tab should be lowered to keep it in place. Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄ OL-24878-01...

Table of Contents