Adding Application And Line Cards To An Existing Installation - Cisco ASR 5000 Series Installation Manual

Chapter 14
Adding Application and Line Cards to an Existing
Installation
This chapter provides instructions for installing additional application and line cards in an installed chassis that is
processing calls (a production system).
This chapter includes the following sections:

Chassis Slot Numbering and Assignments

Adding Application Cards

Adding Half-Height Line Cards

Adding a 10 Gigabit Ethernet Line Card
Important:
without powering the chassis down. However, it is strongly recommended that you add system components during a
maintenance window.
All application and line cards are hot swappable. You can install or remove cards from the chassis
ASR 5000 Installation Guide ▄
195