Network Uplink Cards; Cisco Single Port Gigabit Ethernet Line Card - Cisco Universal Broadband Router uBR10012 Hardware Installation Manual

Chapter 1 Cisco uBR10012 Universal Broadband Router Overview

Network Uplink Cards

The following sections describe the network uplink cards used in the Cisco uBR10012 universal
broadband router:
•
•
•
•
•

Cisco Single Port Gigabit Ethernet Line Card

The single-port Gigabit Ethernet (GE) line card provides a trunk uplink to devices such as GSRs, as well
as connections to content servers and Web caches. The GE line card provides the Cisco uBR10012 router
with an IEEE 802.3z compliant Ethernet interface running at 1 Gbps in full duplex mode.
The port uses a Gigabit Interface Converter (GBIC) that supports Gigabit Ethernet rates on a variety of
Gigabit Ethernet interface types (SX, LX/LH, ZX) which can be changed or upgraded at any time (see
Table
multiple destinations and to provide network layer redundancy.
Warning Class 1 laser product. Statement 1008.
Invisible laser radiation present. Statement 1016.
Warning
Because invisible radiation may be emitted from the aperture of the port when no fiber cable is
Warning
connected, avoid exposure to radiation and do not stare into open apertures. Statement 1056.
Warning Statement for Sweden
Warning Osynlig laserstrålning när denna del är öppen och förregleringen är urkopplad. Rikta inte blicken in
mot strålen. Statement 36.
Warning Statement for Finland
Warning Alleviates ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Äjä katso
säteeseen. Statement 35
OL-18259-09
Cisco Single Port Gigabit Ethernet Line Card, page 1-29
Cisco Half-Height Gigabit Ethernet Line Card, page 1-31
Cisco OC-12 POS Line Card, page 1-31
Cisco uBR10-SRP-OC12SML DPT WAN Line Card, page 1-33
Cisco uBR10012 OC-48 DPT/POS Interface Module, page 1-33
1-9). The Cisco uBR10012 router supports multiple GE line cards to support connectivity to
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
Network Uplink Cards
1-29