Fujitsu AUYG07LVLA Design & Technical Manual page 323

FUNCTION SETTING
3) Press the "Set Time <" button or the "Set Time >" button, to select the function number.
4) Press the "SET TEMP. V" button or the "SET TEMP.
he disp a ashes during setting nu ber se ection.
Press the
(The data will be transferred to the indoor unit.)
When the data was not set up on the indoor
unit "--" is displayed.
Set up the data again according to the
procedure in step 3), 4) above.
FUNCTION DETAILS
Refer to 5-6. FUNCTION DETAILS
Ex.) Function number : 30, Setting number : 01
button confir the setting.
ERROR
When the data was correctly set up on the indoor
unit.
(Flashing display changes to illuminated display.)
- (06 - 75) -
Function number
button, to select the setting number.
Setting number
GOOD
6. SYSTEM DESIGN