Fujitsu AUYG07LVLA Design & Technical Manual page 283

Fix the unit (For wall installation)
<Horizontal installation>
(1) Secure the hangers (accessories) with the
screws (2 pieces, Ø 4 x 10mm, accessories).
(4 places)
nsta the unit with its top side acing
upwards.
Top side
(2) For temporary mounting of the unit, install two
of the Ø 4×25mm screws in the wall, allowing
the space of 5 to 10mm between the wall and
the screw heads. Then hook the unit over
these two screws.
469 mm
Pitch for securing
the tapping screws
ter chec ing that the unit is
mount the branch box with the 8 screws (Ø
4 x 25mm, accessories) provided including
the tapping screws. (The unit's slope must be
within ±5° in all directions.)
Screw
Screw
<Vertical installation>
(1) Secure the hangers (accessories) with the
Hanger
Screw
(2) For temporary mounting of the unit, install two
Space
between wall
and head of
screw:
Tapping
5 to 10 mm
screws
at secure and
Screw
Screw
- (06 - 35) -
screws (2 pieces, Ø 4 x 10mm, accessories).
(4 places)
nsta the unit with the contro bo acing
upwards.
Screw
of the Ø 4×25mm screws in the wall, allowing
the space of 5 to 10mm between the wall and
the screw heads. Then hook the unit over
these two screws.
469 mm
Pitch for securing
the tapping screws
ter chec ing that the unit is
mount the branch box with the 8 screws (Ø
4 x 25mm, accessories) provided including
the tapping screws. (The unit's slope must be
within ±5° in all directions.)
Screw
Screw
Control box
Hanger
Space
between wall
and head of
screw:
Tapping
5 to 10 mm
screws
at secure and
Screw
Screw
6. SYSTEM DESIGN