Remote Sensor Unit - Fujitsu AUYG07LVLA Design & Technical Manual

2-6.

REMOTE SENSOR UNIT

MODEL : UTY - XSZX
FEATURES
New amenity space can be offered by installing the Remote sensor.
ELECTRICAL WIRING
Remove the screws from the remote sensor, and remove the cover.
Connect the cable to the remote sensor as shown below.
Ensure that the wires do not contact each other.
Remote sensor
INSTALLATION
When the cable is attached to the wall
Remove the material covering the wiring penetration (thin material) in the cover of the sensor
unit with a pair of cutters. The cable passes through this hole.
Now the remote sensor on the wall using the screws.
Screw
(M4 x 16mm)
To indoor unit
Cable
Mounting hole dimensions
- (05 - 51) -
40
[Unit : mm]
5. CONTROL SYSTEM