Fujitsu AUYG07LVLA Design & Technical Manual page 301

FUNCTION SETTING
1) After verifying that the system is normal, press the MODE/EXIT button (SW931) once.
LED961 LED962
2) Press the SELECT button (SW932), and display "F2" on the LED962.
(Monitoring mode)
LED961 LED962
*1
(The display of the LED962 changes each time when the SELECT button is pressed.)
*1:The "F1"and "F9" modes are used for maintenance, so do not set them in regular operation.
3) When "F2" appears on the LED962, press the ENTER button (SW933).
ashing disp a appears on the
changes to the illuminated display of a number.
LED961 LED962
4) Referring to the Settings List shown below, press the SELECT button (SW932) and display the
code number of the mode you want to set on the LED961.
Ex.) To select switching between Forced Stop and Emergency Stop
LED961 LED962
e t press the
set.
ashing disp a on the
on the changes to a ashing disp a .
LED961 LED962
LED961 LED962
(Setting mode)
LED961 LED962
and the ashing disp a o
LED961 LED962
LED961 LED962
button and confir
changes to an i u inated disp a and an i u inated disp a
LED961 LED962
- (06 - 53) -
(Function mode)
LED961 LED962
the se ection o the
(Error history mode)
LED961 LED962
*1
on the
ode ou want to
6. SYSTEM DESIGN