FUNCTION SETTING
(5) Press the "10°C HEAT" button to access
the fuction setting mode.
(7) Press the "POWERFUL" button to proceed
to the setting number.
(Press the "POWERFUL" button again to
return to the function number selection.)
(9) Press the "MODE" button once to send the
function mode information.
FUNCTION DETAILS
Refer to 5-6. FUNCTION DETAILS
(6) Press the "TEMP.
(8) Press the "TEMP.
(10) Press the "
Pi Pi
Note: Please push the "
- (06 - 70) -
" or "TEMP.
buttons to select the function number.
Press the "10°C HEAT" button to switch
between left and right digits.
" or the "TEMP.
buttons to select the setting number.
Press the "10°C HEAT" button to switch
between left and right digits.
/ " button once to fi the
function setting.
A beeping noise will be heard if the
command is accepted.
*Wrong code: No Response
/ " button within 30 seconds
after pushing the "MODE" button.
"
Change digit
"
Change digit
Pi Pi
6. SYSTEM DESIGN