B Auto Read/Auto Write - Omron V600-CD1D-V2 Operation Manual

Use of Auto Read/Auto Write Command
Generally, the read or write command is used while the DC is not moving. The auto command, in contrast, is used
while the DC is moving.
Read/Write Commands
• The communication distance width is wider than when the DC is moving, so that communications can be accu-
rately performed.
Auto Read/Write Commands
• By using the auto command, the approaching or missing DC can be automatically detected.
• If the DC moving speed is low and positioning is accurate, the communication is not limited by distance (within
reason).
Appendix B
Auto Read/Auto Write
R/W Head or
R/W Antenna
DC
Not moving
R/W Head or
R/W Antenna
DC
Moving
69