Command Format - Omron V600-CD1D-V2 Operation Manual

Command Format

4-3

Command Format

Command/Response List
No. Command
1 Read
2 Write
3 Expansion
read
4 Expansion
write
5 Auto read
6 Auto write
7 Polling auto
read
8 Polling auto
write
9 Command
processing
terminate
10 Data
management
command
11 Write
processing
repeat
12 Controller
control
13 Error
information
read
14 Test
15 Abort (reset0
16 Command
undefined
response)
32
Header
RD Reads or writes data to or from the Data Carrier. If the Data Carrier is missing,
an error response returns.
WT
XR
XW
AR Reads or writes data to or from the Data
Carrier. If the Data Carrier is missing, waits until
the Data Carrier approaches
AW
PR
PW
AA Terminates the processing of commands other than polling command.
MD Checks the data of the Data Carrier's memory.
Manages the number of overwriting operations on the EEPROM-type Data
Carrier.
RP Repeatedly executes the write command that was previously executed.
CC Performs user input/output operation.
CF Reads a log information error.
TS Returns as a response a test message sent from the host computer.
XZ Restores the ID Controller to previous state upon power application. No
response is returned.
IC The response returned by the ID Controller when the ID Controller receives an
undefined command from the host computer.
Description
Responds upon completion of
command processing.
Can inquire about the result
of command processing
Section 4-3