Diagnostics - Omron V600-CD1D-V2 Operation Manual

Diagnostics

5-2

Diagnostics

Errors
Errors that Stop Operation
Errors that Allow Operation to Continue
Indicators and Outputs
Status
Test Lower
processing in
progress
Lower
processing
interval
Communication
error
occurrence
RUN Command
reception wait
Command
processing in
progress
Communication
error
occurrence
Stop error CPU error
Memory error
Emergency External reset
stop input ON
52
If a hardware error of the ID Controller has occurred, the STOP indicator lights,
and RUN output is turned OFF.
If an error has occurred during communications between the ID Controller and
the host computer, or between the Controller and the R/W Head, the error code
is displayed on the monitor (error code display mode). Up to 30 error codes are
recorded and can be read by the host controller.
Indicator
POWER HEAD
Lit Lit Not lit
Lit Not lit Not lit
Lit Not lit Not lit
Lit Not lit Not lit
Lit Lit Not lit
Lit Not lit Not lit
Lit Not lit Lit
Lit Not lit Lit
Lit --- Lit
Note USR: Set by the controller control command.
Monitor
STOP RUN
--- OFF
--- OFF
Error OFF
code
--- ON
--- ON
Error ON
code
92 OFF
93 OFF
--- OFF
Section
Output
End of User 1 User 2
pro-
cessing
OFF --- ---
OFF --- ---
OFF --- ---
OFF --- ---
OFF USR USR
ON --- ---
OFF --- ---
OFF
OFF --- ---
5-2