Minolta CR-400 Instruction Manual page 86

Displaying Measurement Results
Judgment
The display is as shown in the figure at right when no color difference
tolerance is set.
Setting the color difference tolerance (see P.116 "Setting the Color
Difference Tolerance") makes the following judgement is displayed.
O PASS: This is displayed when the value is within the color difference tolerance.
∆ WARN: This is displayed when value is within the color difference tolerance, but exceeds the warn-
ing level.
X FAIL: This is displayed when the value exceeds the color difference tolerance.
Ｔ０１ ［０００１］
ＰＡＳＳ／ＦＡＩＬ
ＰＡＳＳ
Ｐ００ C P ［０００１］
84
Ｔ０１ ［０００１］
ＰＡＳＳ／ＦＡＩＬ
ＷＡＲＮ
Ｐ００ C P ［０００１］
Ｔ０１ ［０００１］
ＰＡＳＳ／ＦＡＩＬ
Ｐ００ ［０００１］
C P
Ｔ０１ ［０００１］
ＰＡＳＳ／ＦＡＩＬ
ＦＡＩＬ
Ｐ００ C P ［０００１］