<CMC Parameter Setting>
The CMC parameter can be set anywhere in the range of 0.1 to 9.9.
See P.79 "Color Space and Changing the Display" and P.80 "Color Space and Color Difference Set-
ting" for details on setting conditions.
1
[Operating Procedure]
After steps 1 to 3 on P.74 "Setting a Displayed Color Limit", perform following steps below.
Select the CMC parameter settings using the
4
Press the Measure/Enter key
5
• The cursor is displayed below the CMC parameter setting.
6
Set the CMC parameter using the
meric pad.
Input range: 0.1 - 9.9
7
Once the setting is complete, press the Measure/En-
ter key
to return to color space selection in the
displayed color limit screen.
• Pressing the Escape key
.
key or the nu-
Esc
returns to the previous screen.
6
2,4
3,5,7
key.
[DISP. LIMIT]1/2
XYZ ON
Yxy ON
L*a*b* ON
HLab ON
L*C*h ON
CMC OFF
(l:c)=(1.0:1.0)
CIE1994 OFF
P00
C P
Displayed color limit
screen (Page 1 of 2)
[0001]
75