Setting Status Of Connected Measuring Head And Data Processor - Minolta CR-400 Instruction Manual

<Setting Status of Connected Measuring Head and Data Processor>
The common default settings and connecting status of connected measuring head and data processor
are shown as follows.
• Setting items which are not described below are not changed in spite of connecting status.
(Head: Measuring Head, DP: Data Processor)
Item
Illuminant
White calibration data
User calibration Ch
Multi-calibration
Target color data
Selected color
difference target color
Mesurement data
Selected color space
Screen display
Displayed color limit
(CMC parameter)
User index
Date & time
Language
Baud rate
Protecting data
Number of measurements
for average
64
Default
Head DP
C C
−
0
−
None
−
OFF
−
None
−
None
None None
XYZ XYZ
Absolute value/ Absolute value/
color difference color difference
See P.76 See P.76
"Initial Settings" "Initial Settings"
None None
Adjustment at Adjustment at
shipment shipment
English *English
9600 *19200
OFF OFF
Once Once
Connecting status
(The data of arrow left side overwrites
the data of arrow right side)
DP → Head
The DP data can overwrite the
Head data when the instrument is
initial settings.
Head → DP
The data is not stored in DP
(operation only)
Head → DP
The data is not stored in DP
(operation only)
−
The Head data can be transfered
to DP by optional setting
"moving data".
When the measuring head is
DP → Head *
disconnected from the data
processor and used, the settings at
the time of disconnection remain.
DP → Head User index only: Head → DP
Head → DP
(User index is not initialized by
"Initial Settings" of DP.)
DP → Head
If backup batteries are dead the
setteing becomes 2002/01/01
00:00
(It is not initialized by "Initial
Settings" of DP.)
DP → Head
(It is not initialized by "Initial
*
Settings" of DP.)
Head → DP
Baud rate of DP remote mode is
*
fixed at 19200.
(It is not initialized by "Initial
Settings" of DP.)
DP → Head
Remarkes