Minolta CR-400 Instruction Manual page 136

User Calibration
8 Move the cursor using the
using the numeric pad.
Input range: 0.01 ≤ X, Y, Z ≤ 160
9 Place the measuring head vertically above a target
specimen.
10 Press the Measure/Enter key
button on the measuring head) after making sure the
ready lamp is ON.
Do not move the measuring head during measurement.
11 Once measurement is complete, set the calibration channel name using the
key and the numeric pad.
(How to set the calibration channel name)
1) Select input mode using the
• Pressing the
letters → numbers → lower case Latin letters.
2) Move the cursor using the
the numeric pad.
• The name is up to 9 characters (see P.20 "As input keys" for details.)
12 Once settings are complete, press the Measure/Enter key
• Settings are complete, complete sound beeps and the display returns to the measurement screen.
134
key and set the value
(or measurement
key.
key changes the input modes in the following order: upper case Latin
key and input the color difference target color name using
［ＣＡＬＩＢ．］
◎ＵＳＥＲ ＣＡＬＩＢ．
Ｙ＝ ８０．７２
ｘ＝０．３２０８
ｙ＝０．２１２１
◎ＣＡＬ． Ｃｈ ＮＡＭＥ Ａ
Ｃｈ０３
Ｐ００ ［０００１］
C P
Setting screen
POWER
［ＣＡＬＩＢ．］
◎ＵＳＥＲ ＣＡＬＩＢ．
Ｙ＝ ８０．７２
ｘ＝０．３２０８
ｙ＝０．２１２１
◎ＣＡＬ． Ｃｈ ＮＡＭＥ Ａ
ＭＩＮＯＬＴＡ
Ｐ００ C P ［０００１］
Setting screen
.