Setting The Automatic Measurement - Minolta CR-400 Instruction Manual

<Setting the Automatic Measurement>
No key other than the Escape key
into automatic measurement standby status. Be sure to set color space, display, color differ-
ence target color, and other settings ahead of time.
Selecting timer in P.115 displays the [timer] setting screen.
Move the cursor using the
1
val time using the numeric pad.
(Input range ) 00m 03s to 99m 59s
• Set interval time longer than a measurement time which in-
cludes the number of measurements for average and printing.
Press the Measure/Enter key
2
• The end time setting screen appears.
3 Move the cursor using the
time using the numeric pad.
• Enter a time which exists in the calendar until 2099. The dis-
play uses 24-hour time.
• If no end time is entered, measurement is endless.
4 Press the Measure/Enter key
• Once settings are complete, the display returns to the measurement screen.
Press the Measurement key
5
• Press the Escape key
• All other keys does not work.
• The buzzer sounds approximately every second during automatic measurement. (Only if the
buzzer setting is ON.)
• If battery power is used, the measurement time becomes longer as the battery voltage drops, so
we recommend using the AC adapter.
• The timer measurement icon
Esc functions after the timer is set and the instrument goes
key and set the inter-
.
key and set the end
.
to start measurement.
(for a long time) to cancel automatic measurement.
Esc
is displayed.
1,2
3,4
［ＡＵＴＯ ＭＥＡＳ．］
◎ＩＮＴＥＲＶＡＬ ＴＩＭＥ
００m０３s
Ｐ００ C P ［０００１］
Setting screen
［ＡＵＴＯ ＭＥＡＳ．］
◎ＥＮＤ ＴＩＭＥ
２００２Ｙ／０１Ｍ／０１Ｄ
１４：３５
Ｐ００ ［０００１］
C P
Setting screen
125