Box Tolerance - Minolta CR-400 Instruction Manual

Box tolerance

This judges whether or not the value of the measured color difference is within the range of the box
tolerance limit set for the color difference target color. When setting a box-type tolerance, color differ-
ence tolorance (±) for each color difference target color can also be set.
Set a color difference target color ahead of time before setting a box tolerance.
5,7
Selecting the limit value in P.115 displays the [limit value] selection screen.
[Operating Procedure]
1 Use the key to select a color difference target
color.
2 Press the Measure/Enter key
• The tolerance type screen appears.
3 Select the "BOX" as the tolerance type.
Press the Measure/Enter key
4
• The limit value setting screen will appear.
• If a color difference tolerance is already set, go to step 6 as the
set color difference tolerance data is displayed.
.
.
1,3,5,7
2,4,6,8
［ＴＯＬＥＲＡＮＣＥ］ １／１
◎ＴＡＲＧＥＴ
Ｔ０３
Ｔ０２
Ｔ０１
Ｐ００ C P ［０００１］
Selection screen
［ＴＯＬＥＲＡＮＣＥ］
◎ＴＯＬＥＲＡＮＣＥ ＴＹＰＥ
ＥＬＬＩＰＴＩＣＡＬ
ＢＯＸ
ΔE＊
ＢＯＸ ＆ ΔE＊
Ｐ００ Ｃ P ［０００１］
Tolerance type screen
［ＴＯＬＥＲＡＮＣＥ］
◎ＴＯＬＥＲＡＮＣＥ
Ａ Ｂ
ΔL＊ Δa＊
＋ ０．００ ＋ ０．００
− ０．００ − ０．００
Ｃ Ｄ ΔE＊
Δb＊
＋ ０．００ ．
− ０．００
Ｐ００ Ｃ ［０００１］ P
Setting screen
119