Minolta CR-400 Instruction Manual page 123

∆E
This judges whether or not the value of the measured color difference is within the range of the ∆E set
for the color difference target color.
∆E is displayed as followings depending on set color spaces.
∆E*, ∆E, ∆E94, ∆E99, ∆E00, CMC
Set a color difference target color ahead of time before setting ∆E.
5,7
Selecting the limit value in P.114 displays the [limit value] selection screen.
[Operating Procedure]
Use the key to select a color difference target
1
color.
2 Press the Measure/Enter key
• The tolerance type screen appears.
Select the "∆E*" as the tolerance type.
3
4 Press the Measure/Enter key
• The limit value setting screen will appear.
• If ∆E is already set, go to step 6 as the set color difference
tolerance data is displayed.
.
.
1,3,5,7
2,4,6,8
［ＴＯＬＥＲＡＮＣＥ］ １／１
◎ＴＡＲＧＥＴ
Ｔ０３
Ｔ０２
Ｔ０１
Ｐ００ C P ［０００１］
Selection screen
［ＴＯＬＥＲＡＮＣＥ］
◎ＴＯＬＥＲＡＮＣＥ ＴＹＰＥ
ＥＬＬＩＰＴＩＣＡＬ
ＢＯＸ
ΔE＊
ＢＯＸ ＆ ΔE＊
Ｐ００ Ｃ P ［０００１］
Tolerance type screen
［ＴＯＬＥＲＡＮＣＥ］
◎ＴＯＬＥＲＡＮＣＥ
Ａ Ｂ
ΔL＊ Δa＊
＋ ＋
− −
Ｃ Ｄ ΔE＊
Δb＊
＋ ０．００
−
Ｐ００ Ｃ ［０００１］
P
Setting screen
121