Setting The Displayed Color Limit - Minolta CR-400 Instruction Manual

Basic Setting
<Setting the Displayed Color Limit>
This setting selects the color space to be displayed.
See P.79 "Color Space and Changing the Display" and P.80 "Color Space and Color Difference Set-
ting" for details on the setting conditions.
6
[Operating Procedure]
Press the Index Set key
1
screen.
• The item setting screen will appear.
2 Select "DISP. LIMIT" using the
3 Press the Measure/Enter key
• The displayed color limit screen appears.
4 Select a color space using the
Press the Measure/Enter key
5
each color space.
• The color space being displayed in the measurement screen
cannot be turned OFF.
See P.75 "CMC Parameter Setting" for details on CMC pa-
rameter setting.
• The page can be changed by pressing the
• The page can be changed by keeping the
• This may be three pages long if a user index is registered in
connected measuring head.
(See P.127 "User Index".)
6 Once the settings are complete, press the Escape key
to return to the measurement screen .
Esc
74
1
while in the measurement
Index Set
０
key.
.
key.
to turn ON and OFF
2,4
3,5
key.
key pressed.
［ＩＮＤＥＸ ＳＥＴ］ １／２
ＰＲＩＮＴＥＲ ＯＮ
ＣＯＬＯＲ ＳＰＡＣＥ ＯＦＦ
ＰＲＯＴＥＣＴ ＯＦＦ
ＡＵＴＯ ＡＶＥＲＡＧＥ １
ＩＬＬＵＭＩＮＡＮＴ Ｃ
ＢＡＣＫ ＬＩＧＨＴ ＯＦＦ
ＢＵＺＺＥＲ ＯＮ
ＤＩＳＰ． ＬＩＭＩＴ
Ｐ００ C P ［０００１］
［ＩＮＤＥＸ ＳＥＴ］ １／２
ＰＲＩＮＴＥＲ ＯＮ
ＣＯＬＯＲ ＳＰＡＣＥ ＯＦＦ
ＰＲＯＴＥＣＴ ＯＦＦ
ＡＵＴＯ ＡＶＥＲＡＧＥ １
ＩＬＬＵＭＩＮＡＮＴ Ｃ
ＢＡＣＫ ＬＩＧＨＴ ＯＦＦ
ＢＵＺＺＥＲ ＯＮ
ＤＩＳＰ． ＬＩＭＩＴ
Ｐ００ C P ［０００１］
［ＤＩＳＰ． ＬＩＭＩＴ］１／２
ＸＹＺ ＯＮ
Ｙｘｙ ＯＮ
Ｌ＊ａ＊ｂ＊ ＯＮ
ＨＬａｂ ＯＮ
Ｌ＊Ｃ＊ｈ ＯＮ
ＣＭＣ ＯＦＦ
（ｌ：ｃ）＝（１．０：１．０）
ＣＩＥ１９９４ ＯＦＦ
Ｐ００ ［０００１］
C P
Displayed color limit
screen (Page 1 of 2)
［ＤＩＳＰ． ＬＩＭＩＴ］２／２
Ｌａｂ９９ ＯＦＦ
ＬＣｈ９９ ＯＦＦ
ＣＩＥ２０００ ＯＦＦ
ＷＩ Ｅ３１３ ＯＦＦ
ＹＩ Ｄ１９２５ ＯＦＦ
ＹＩ Ｅ３１３ ＯＦＦ
ＭＵＮＳＥＬＬ ＯＮ
Ｐ００ C P ［０００１］
Displayed color limit
screen (Page 2 of 2)