Sip/Sop Connections; Changing To Remote Mode - Minolta CR-400 Instruction Manual

SIP/SOP Connections

• Accessories equipment connected the analog and digital interfaces must be certified to the respec-
tive IEC standards ( i.e. IEC950 for data processing equipment.)
• Furthermore all configurations shall comply with the system standard IEC 1010-1, Everybody who
connects additional equipment to the signal input part or signal output part configures a electorical
equipment for measurement system, and is therefore, responsible that the system complies with the
requirements of the system standard (IEC 1010-1. If in doubt, consult the technical services depart-
ment or your local representative.)
<Changing to Remote Mode>
PC
[Operating Procedure]
Turn the power OFF ( O ).
1
Connect the instrument to the PC us-
2
ing the RS-232C cable.
Turn the power ON ( I ).
3
2
RS-232C
cable
CR-A 102
RS-232C terminal
Power switch
1,3
129