Box Tolerance And ∆E - Minolta CR-400 Instruction Manual

Box tolerance and ∆E
This judges both box tolerance and ∆E.
5,7
Selecting the limit value in P.115 displays the [limit value] selection screen.
[Operating Procedure]
1 Use the key to select a color difference target
color.
2 Press the Measure/Enter key
• The tolerance type screen appears.
Select the "BOX & ∆E*" as the tolerance type.
3
Press the Measure/Enter key
4
• The limit value setting screen will appear.
• If color difference tolerance and ∆E are already set, go to step
6 as the set color difference tolerance data is displayed.
.
.
1,3,5,7
2,4,6,8
［ＴＯＬＥＲＡＮＣＥ］ １／１
◎ＴＡＲＧＥＴ
Ｔ０３
Ｔ０２
Ｔ０１
Ｐ００ ［０００１］
C P
Selection screen
［ＴＯＬＥＲＡＮＣＥ］
◎ＴＯＬＥＲＡＮＣＥ ＴＹＰＥ
ＥＬＬＩＰＴＩＣＡＬ
ＢＯＸ
ΔE＊
ＢＯＸ ＆ ΔE＊
Ｐ００ Ｃ P ［０００１］
Tolerance type screen
［ＴＯＬＥＲＡＮＣＥ］
◎ＴＯＬＥＲＡＮＣＥ
Ａ Ｂ ΔL＊
Δa＊
＋ ０．００ ＋ ０．００
− ０．００ − ０．００
Ｃ Ｄ ΔE＊
Δb＊
＋ ０．００ ０．００
− ０．００
Ｐ００ Ｃ ［０００１］
P
Setting screen
123