Minolta CR-400 Instruction Manual page 79

• The initial setting screen appears after the operating screen.
Press the Measure/Enter key
2
ization.
• If the power is already ON, turn it OFF, wait a few seconds,
and then proceed with the initialization.
to start the initial-
［ＩＮＦＯＲＭＡＴＩＯＮ］
ＮＯＷ ＯＰＥＲＡＴＩＮＧ．．．
Ｐ００ C P ［０００１］
Operating screen
［ＩＮＩＴ． ＳＥＴＴＩＮＧ］
ＩＮＩＴＩＡＬ ＳＥＴ ＯＫ？
ＥＸＥＣＵＴＥ：［Ｅｎｔｅｒ］
Ｐ００ C P ［０００１］
Initial setting screen
77