Minolta CR-400 Instruction Manual page 49

3
Press the Enter key
• The selection of the color difference target color is complete
and returns to the measurement screen.
4
Place the measuring head vertically above the specimen .
5
Press the measurement button of the measuring head
after making sure the ready lamp is ON.
• Measurement is done and the measurement data is displayed.
Do not move the measuring head during measurement.
• After measurement, pressing the Color Space key
spaces. (See P.31 " Selecting the Color Space".)
• Measured data is automatically stored.
If you do not wish to store data, press the Delete/Undo key
If you mistakenly delete data you wished to keep, press the Delete/Undo key
the latest deleted data is restored.
Note, however, that if new measurement data replaces the latest deleted data, that data is no
longer restorable, since the new data is stored in its place.
• Up to 1000 measurement data sets can be stored.
Oldest data is overwritten if this limit is exceeded.
.
ENTER
COLOR
Ｔ００ ［０００１］
Ｌ＊＝ ８９．２６
ａ＊＝ １．７９
ｂ＊＝ １４．８９
ΔＬ＊＝
Δａ＊＝
Δｂ＊＝
ΔＥ＊＝
Ｃ １
Ｔ００ ［０００２］
Ｌ＊＝ ８９．２０
ａ＊＝ １．７９
ｂ＊＝ １５．０５
ΔＬ＊＝ −０．０２
Δａ＊＝ ＋０．０５
Δｂ＊＝ ＋０．０１
ΔＥ＊＝ ０．０６
Ｃ １
converts the measurement data to other color
to delete the latest data.
Mesurement data
POWER
Mesurement data
again and
47