Deleting The Stored Data; Deleting/Undoing The Latest Data; Deleting/Undoing The Selected Data - Minolta CR-400 Instruction Manual

Deleting the Stored Data

There are four ways of deleting data: only the latest data, only the selected 1 data, by page, and all data.
The operating procedure is described below.
<Deleting/Undoing the Latest Data>
[Operating Procedure]
Press the Delete/Undo key
1
• Only the latest data is deleted and the display returns to the previous measurement screen.
Pressing the Delete/Undo key once more restores the latest data.
Note, however, that if new measurement data replaces the most recently deleted data, that data
will no longer be restorable, since the new data will be stored in its place.
<Deleting/Undoing the Selected Data>
5
1
[Operating Procedure]
Press the Data List key
1
screen.
• The data list screen appears.
Select a page using
2
112
1
while in the measurement screen.
while in the measurement
Data List
８
ＴＵＶ
key.
2,4
3
［ＤＡＴＡ ＬＩＳＴ］ １／１
ＮＥＷ
Ｐ０２
Ｐ０１
Ｐ００
Ｐ００ C P ［００３０］
List screen
［ＤＡＴＡ ＬＩＳＴ］ １／１
ＮＥＷ
Ｐ０２
Ｐ０１
Ｐ００
Ｐ００ C P ［００３０］