Optional Setting
5
Set the color difference tolerance and the offset using the
meric pad.
Tolerance of ∆L*
Input ranges for the set values
(Tolerance)
(Offset)
(Rotation)
(Warning level)
If the rotation is set,the graph showing tolerance range is not made.
6
Press the Measure/Enter key
• The gradient/warning level setting screen is displayed.
7
Set the rotation and the warning level using the
key and the numeric pad.
8
Press the Measure/Enter key
• Once the elliptical tolerance setting is complete, the measure-
ment screen appears.
• Measurement points within the color difference tolerance are
plotted as O, warning level points are plotted as ∆, and points
out of the color difference tolerance are plotted as X.
118
Target
value
Tolerance of ∆a*
Y: 0.01 to 99.99, xy: 0.0001 to 0.9999, other than Yxy: 0.05 to 80.00
-5.00 to +5.00 (should be within to tolerance)
-45 to +45
10 to 100%
.
.
key and the nu-
Offset
(∆a*, ∆b*)
Rotation
(∆a*, ∆b*)
Tolerance of ∆b*
[TOLERANCE]
◎ROTATION
Δa*−Δb* + 0.0
Δa*−ΔL* + 0.0
Δb*−ΔL* + 0.0
◎WARNING LEVEL
100%
P00 C P [0001]
Setting screen
T02 [0001]
ΔL* Δb*
0.02 0.01
P00
C P
Measurement result
(example)
[0001]