Installation Completion; Nametag Placing; Nametag Inserting/Replacing - 2N Helios IP Base Installation Manual

Installation Completion

Check the connection of all wires and the RJ-45 plug to the board connector.
Caution
All unused connectors have to have tightened screws in order to avoid
vibration caused by sound.

Nametag Placing

Every intercom package includes a piece of transparent foil, which can be laser
printed. Download the printing template from
non-water-proof materials for your tags. Water may get inside the name tag – this has
no influence on the device function.
Caution
The area where nametags are placed is called a wet zone. After heavy
rain, water can penetrate to the nametag. Water in this area does not
affect the intercom functionality in any way and evaporates soon.
Always use waterproof foil (enclosed or other) for the nametags. Never
use paper or ink jet printing to avoid damage due to water leakage!

Nametag Inserting/Replacing:

Remove the frame.
1.
Remove the button cover using the clips placed on the shorter sides of the
2.
cover.
Remove the used nametag and insert a new one.
3.
Replace the button cover.
4.
Replace the frame.
5.
2N TELEKOMUNIKACE a.s., www.2n.cz
www.2n.cz . Do not use paper or other
41/60