Dynamic/Static Ip Address Switching - 2N Helios IP Base Installation Manual

Note
Be sure to press the button sequence within thirty seconds after the
sound signal for security reasons. Up to 2 s intervals are allowed
between the presses.

Dynamic/Static IP Address Switching

Take the following steps to switch the dynamic and static IP address mode in
®
2N Helios IP Base :
Connect (or, if connected, disconnect and reconnect)
power supply.
Wait for the first sound signal
Press the quick dial button on the main unit 15 times.
Switching is signalled with the sound signal
Wait until the device is restarted automatically.
Upon restart, the static IP address mode will be switched to the dynamic IP
address mode and vice versa.
2N TELEKOMUNIKACE a.s., www.2n.cz
.
.
®
2N Helios IP Base
44/60
to the