Electric Lock Connection - 2N Helios IP Base Installation Manual

Legend
RESET
(RST)
LED
Tip
Wiring Diagram of IN1 connector in active mode
Wiring Diagram of IN1 connector in passive mode

Electric Lock Connection

Connect the electric lock or another electric appliance directly to the device Active
input or use a relay to switch the power supply. In the latter case, use an external lock
supply. In any case, you are recommended to use low-consumption locks and keep the
limits mentioned above.
2N TELEKOMUNIKACE a.s., www.2n.cz
RESET / FACTORY RESET button
LED indicators (red – device state / green – eth. link up / yellow – LAN
activity)
28/60