External Power Supply; Electric Lock Connection - 2N helios ip force Installation Manual

External Power Supply Connection
®
2N Helios IP Force
supply or from the LAN equipped with the PoE 802.3af supporting network elements.

External Power Supply

An external 12 V power supply is connected to terminal block X19. Use a 12 V ± 15 %
DC power source dimensioned to current intake of 2 A at least (Part No. 91341481E) to
ensure a reliable function of your device.
PoE Supply
®
2N Helios IP Force
technology and can be supplied directly from the LAN via compatible network
elements. If your LAN in incompatible, insert the PoE injector, Part No. 91378100E/US,
®
between 2N Helios IP Force

Electric Lock Connection

®
2N Helios IP Force
NC contacts (terminal block X17, max. 30 V / 1 A AC/DC) and 9 up to 13 V DC
depending on power supply (PoE: 9 V; adaptor: power supply voltage minus 1 V), max
700 mA switched output (terminal block X18), to which a standard electric lock or
another compatible electrical appliance can be connected.
Note
Devices with PCB version 555v3 and higher provides independent
control of 12 V switched output (terminal block X18) and relay switch
(terminal block X17). Devices with PCB version 555v2 have both outputs
switched simultaneously.
2N TELEKOMUNIKACE a.s., www.2n.cz
can be fed either from an external 12 V ±15 % / 2 A DC power
is compatible with the PoE 802.3af (Class 0 – 12.95 W)
and the nearest network element.
is equipped with an electrically isolated relay switch with NO and
55/110