6.13.2
Removing the USB devices
■1. For GT27, GT25
Step 1.
Place the USB device in removable mode.For the setting method, refer to the following.
➠
GOT2000 Series User's Manual (Utility)
Step 2.
Remove the USB interface from the USB interface (Host) as shown below.
Step 3.
Push the [PUSH] mark on the USB environmental protection cover to close the cover.
■2. For GT2107
Step 1.
Place the USB device in removable mode.For the setting method, refer to the following.
➠
GOT2000 Series User's Manual (Utility)
Step 2.
Remove the USB interface from the USB interface (Host) as shown below.
6.13 Installing and Removing the USB Devices (GT27, GT25, GT2107)
6
6 - 59