Mitsubishi Electric GOT2000 Series User Manual page 158

Step 3.
For GT2107
Insert the hook of an installation fitting (supplied) into the mounting hole of the GOT.
Tighten the supplied screws within the specified torque range (0.36 N•m to 0.48 N•m) to fix the GOT.
For GT2105
Insert the hook of an installation fitting (supplied) into the mounting hole of the GOT.
Tighten the supplied screws within the specified torque range (0.3 N•m to 0.5 N•m) to fix the GOT.
Enlarged view
Installation fitting
Mounting screw
For GT2104, GT2103
Insert the hook of an installation fitting (supplied) into the mounting hole of the GOT.
Slide the installation fitting toward the GOT rear face.
Then, viewing from the GOT rear face, slide the fitting to the left to fix, and tighten a screw within the
specified torque range (0.20 N•m to 0.25 N•m).
Fix the GOT using 4 fittings at the top and the bottom of the GOT.
Installation fitting
Mounting screw 2)
3)
1)
6 - 30
6.6 Installing the GOT